| Model-BS-K is a kind of deep tank lotation machine
with aeration. Again, the impeller plays roles of agitating shurry,
cycling slurry and distributing air. Therefore, the wearable parts
suffer less waaring. It requires less power than the other models.
This machine has no ability to pump slurry, thus bench arrangement
is necessary, and foam pump is needed. |
| Models XCF and KYF are enforced aeration flotation
machine. It has a smaller diameter of impeller, thus lower peripheral
speed, saving 30%-50% of power. Because and air distributor is equipped
in the tank, air is evenly dispersed. The impeller acts as a centrifugal
pump, so as to make the solid particles suspending. The tank is made
as Utype, reducing sand settlement to the least. Due to reasonable
design of the impeller structure and the impeller space,impeller wearing
is even, so, the service life of the impeller and stator are extended.
Model KYF is unable to spontaneously suck slurry, while has low power
consumption. In contrast, model XCF has the ability to automati-cally
suck slurry, and may be allocated horizontally without need for foam
pump, but consumes more nower than model KYF. Thereore, model XCF
and model KYF are combined into a set, i.e., XCF as the sucking tank,
and KYF as the direct tank. The combined set can be arranged horizontally
without foam pump either. |
